-
Hộp phân phối sợi
-
Hộp phân phối FTTH
-
Hộp phân phối cáp
-
Module LSA Plus
-
Khung phân phối chính MDF
-
Khối đầu cuối thuê bao
-
Rack Mount Patch Panel
-
Jack khóa Keystone
-
Quản lý cáp ngang
-
Cáp mạng
-
110 Khối đầu cuối
-
Khung Phân phối Quang ODF
-
Dây Cáp Quang Sợi
-
Kết nối cáp quang
-
Khối đầu cuối IDC
-
Mạng Punch Down Công cụ
-
Phụ kiện sợi quang
-
ONU OLT
-
nhãn nhạy cảm với nhiệt độ
DIN Rack Install Subscriber Terminal Block VX module With / Without Protection

Liên hệ với tôi để lấy mẫu miễn phí và phiếu giảm giá.
WhatsApp:0086 18588475571
wechat: 0086 18588475571
Skype: sales10@aixton.com
Nếu bạn có bất kỳ mối quan tâm nào, chúng tôi cung cấp trợ giúp trực tuyến 24 giờ.
xname | VX module | Environment condition | 5-40 degree Celsius ,Relative humidity <85% (+30 degree Celsius),Atmospheric pressure, 70-106KPa |
---|---|---|---|
plate | silver 20-40uinch | pulling-out force | not less than 25N |
standard | GB/T 5169.7-1985 | material | pc |
install | DIN rack | Protective | GDT |
Làm nổi bật | vx module,telecom distribution box |
Applications and feature:
- STB is a high reliability connection module, designed to withstand all existing climates.
- Watertight by design, it provides the best service for the following applications:
- Interface boxes UG/Aerial/Networks
- Distribution points
-Customer termination devices
- Fits on DIN 35 rails
- Very compact, overall dimensions allow to replace existing won protected solution by a high reliability solution.
- No special tool required, only by a standard screw driver.
Range of the section: | diameter 0,4… 1,2 mm |
Diameter on the isolation: | it is maximal 5 mm |
The current-response characteristics: | 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance | |
“Dry” atmosphere: | > 10 12 Ohm |
“Moist” atmosphere (standard ASTM Of d618, procedure F): | > 10 12 Om |
Salt fog: (standard ASTM Of b117) | > 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) | > 10 10 0m |
The contact resistance | |
R of material + R of the contact cross connection + by R of the contact connection of the wires | < 10 m |
Increase in the contact resistance | |
After climatic testings: | <2,5 m |
After 50 connections - turning offs: | <2,5 m |
Dielectric strength: | >3 kV of direct current during 1 minute |
Mechanical characteristics
Screw of the connection of the pair of the distributive wire: | Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection | Transparent polycarbonate |
the distributive wire: Housing: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Fitted contacts: | Tinplated phosphor bronze |
Contacts of the grounding: | Alloy Cu - Zn - Ni - Ag |
Contacts of the connection: | Tinplated solid bronze |
Sealing material before the lower part: | The epoxy resin |
Sealing material before the upper cable part: | Silicon compound |
Cover of the pair of the distributive wire: | Polycarbonate |
Housing of the insertable module: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Sealing material of the insertable module: | Gel |
The ring gasket: | Elastomer EPDM |
Spring: | the stainless steel |
Cable laying is the distributive wire: | Thermoplastic rubber |