-
Hộp phân phối sợi
-
Hộp phân phối FTTH
-
Hộp phân phối cáp
-
Module LSA Plus
-
Khung phân phối chính MDF
-
Khối đầu cuối thuê bao
-
Rack Mount Patch Panel
-
Jack khóa Keystone
-
Quản lý cáp ngang
-
Cáp mạng
-
110 Khối đầu cuối
-
Khung Phân phối Quang ODF
-
Dây Cáp Quang Sợi
-
Kết nối cáp quang
-
Khối đầu cuối IDC
-
Mạng Punch Down Công cụ
-
Phụ kiện sợi quang
-
Andreas SandvikRất có kinh nghiệm nhà sản xuất !!
-
Kristober GomezNhà sản xuất đáng tin cậy, đáng tin cậy và có kinh nghiệm Bạn có thể tin tưởng
-
ilker ErimezHọ đã đưa ra các giải pháp hoàn chỉnh về Viễn thông.
-
احمد عبداللهĐầu nối picbond AMCO TYCO của bạn được sử dụng cho viễn thông Iran hoạt động xuất sắc, khách hàng của chúng tôi rất hài lòng với chất lượng.
PC Material Durable Subscriber Terminal Block With Protection Modular Design
Liên hệ với tôi để lấy mẫu miễn phí và phiếu giảm giá.
WhatsApp:0086 18588475571
wechat: 0086 18588475571
Skype: sales10@aixton.com
Nếu bạn có bất kỳ mối quan tâm nào, chúng tôi cung cấp trợ giúp trực tuyến 24 giờ.
xname | VX module | Environment condition | 5-40 degree Celsius ,Relative humidity <85% (+30 degree Celsius),Atmospheric pressure, 70-106KPa |
---|---|---|---|
plate | silver 20-40uinch | pulling-out force | not less than 25N |
standard | GB/T 5169.7-1985 | material | pc |
install | DIN rack | Protective | GDT |
Application | Telecommunication | Life circle | ≥200 times |
Điểm nổi bật | telecom distribution box,stb module |
Range of the section: | diameter 0,4… 1,2 mm |
Diameter on the isolation: | it is maximal 5 mm |
The current-response characteristics: | 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance | |
“Dry” atmosphere: | > 10 12 Ohm |
“Moist” atmosphere (standard ASTM Of d618, procedure F): | > 10 12 Om |
Salt fog: (standard ASTM Of b117) | > 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) | > 10 10 0m |
The contact resistance | |
R of material + R of the contact cross connection + by R of the contact connection of the wires | < 10 m |
Increase in the contact resistance | |
After climatic testings: | <2,5 m |
After 50 connections - turning offs: | <2,5 m |
Dielectric strength: | >3 kV of direct current during 1 minute |
Mechanical characteristics
Screw of the connection of the pair of the distributive wire: | Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection | Transparent polycarbonate |
the distributive wire: Housing: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Fitted contacts: | Tinplated phosphor bronze |
Contacts of the grounding: | Alloy Cu - Zn - Ni - Ag |
Contacts of the connection: | Tinplated solid bronze |
Sealing material before the lower part: | The epoxy resin |
Sealing material before the upper cable part: | Silicon compound |
Cover of the pair of the distributive wire: | Polycarbonate |
Housing of the insertable module: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Sealing material of the insertable module: | Gel |
The ring gasket: | Elastomer EPDM |
Spring: | the stainless steel |
Cable laying is the distributive wire: | Thermoplastic rubber |
1 pair drop wire connection module with protection is equipped with 3 pole 230V gas tube arrester with fail-safe protection.
It is a copper pair connector, specifically designed to fit onto 35mm DIN rails. It is designed to connect 2 copper pairs and has common features such as:
Insulation Displacement Connection
Reliable connections
Flame retardant performance
Modular design and installations
Water and humidity proof
Durable, High Impact, Ultra Violet resistance
Silicon gel filled drop wire STB module